Loading... Please wait...
LIMITED TIME OFFER - FLAT RATE SHIPPING WITHIN CONTIGUOUS U.S. $10.95* - Terms & Conditions
All prices are in USD
  • Image 1
  • Image 2
  • Image 3
  • Image 4

BumperBully Platinum

Current Stock:
Out of stock
$59.95 Factory direct Price: $54.95
(You save $5.00)

Out of Stock

notice:
Straps are spaced 24 inches apart – Please be sure to measure width of trunk opening to ensure best fit

Product Description

Description

The Bumper Bully with Impact Absorber accessory is the ultimate bumper protector. This bumper guard package includes both the Bumper Bully and Impact Absorber accessory together, at a discounted price. The Impact Absorber is a thick soft foam rubber 10mm thick that sticks to the backside of the Bumper Bully, and helps soften the impact.

Not all bumper guards are created equal. Get a bumper protector that really works in the street. Bumper guards are a must have in the urban jungle of New York City. The Bumper Bully is an all weather rear bumper protector made of industrial strength rubber. Vehicles that wear a Bumper Bully have a lower incidence of rear bumper damage than those without a Bumper Bully. Tired of getting screw marks pimpled all over your bumper, then a Bumper Bully is a must have. The Bumper Bully was developed by a parking expert, with years of experience in valet parking

Specs

BumperBully Specs 01

Overall width = 46 inches
Height = 12 inches
Distance between straps = 22 inches
Length of straps = 28 inches

BumperBully Specs 02

Features

Despite what most people think, not all bumper guards are made the same. The Bumper Bully material feels soft to the touch and has an elastic quality.

Competitor products might look like rubber, but they are really made from a cheap quality hard PVC plastic and have no elasticity. Which one would you prefer? The Bumper Bully bumper protector is all about quality. For this reason we use an all weather rubber material that stays flexible even in coldest weather.

  • All Weather Material
  • Premium Quality Soft, Elastic Rubber Material
  • 46” x 12” Extra Wide
  • Proprietary Impact Absorbing Rubber
  • Soft Touch Impact Pads**(Platinum Edition ONLY)
 

 
Feature

Stabilizer Bar System

The patented stabilizer bar system keeps the BumperBully from sagging. Integrally formed within the product, the stabilizer bars lend structural stability to the bumper guard and provide a secure anchor point for the straps. The structural rigidity provided by the stabilizer bars ensures the product will stay flat on the bumper, preventing flop overs and sagging corners.

 
Feature

Waterproof Trunk Straps

The BumperBully trunk straps are made from a special coated material that keeps water from being sucked through the strap and into the trunk. Only the area of the straps exposed to the elements will get wet, the water will not bleed into the rest of the strap, ensuring your trunk any everything in it stays dry.

Feature
 
Feature

All Weather Material

Despite what most people think, not all bumper guards are made the same, the Bumper Bully feels soft to the touch and has an elastic quality. The Bumper Bully is all about quality, made of an all weather rubber material that stays flexible even in coldest weather. Our all weather rubber material can be used rain or shine and will not crack, break or tear.

 
Feature

Steel Reinforced Straps

For added security there is a vinyl coated steel cable embedded inside the heavy-duty trunk straps of the BumperBully. The straps are then triple stitched for durability. Traditional scissors or knives cannot cut the steel reinforced straps on the BumperBully, so you can park with ease on crowded city streets.

Feature
 
Feature

Soft Touch Strap Pads

The BumperBully trunk straps have 2” x 4” soft foam rubber pads on the straps. The pads provide a cushioned surface and raise the straps off the bumper. By raising the straps off the bumper, the soft strap pads add an additional barrier layer between the strap fabric and the vehicle bumper.

 
Feature

Air Impact Ribs

The raised ribs on the BumperBully cushion minor parking bumps, with raised areas that run linear to the surface, providing strategic impact zones. These areas were designed to flex and compress during parking bumps to absorb some of the impact energy.

Feature
 
Feature

3M Safety Reflectors

Using only the best quality products, 3M reflectors provide increased vehicle visibility, better durability and superior adhesion. The reflectors are extra bright, so they provide better illumination and vehicle visibility when parked on dark roads or during emergency stops.

 
Feature

Soft Touch Impact Pads

The BumperBully Platinum Edition (only) comes with an added layer of impact protection, soft foam rubber impact cushions in strategic locations on the back of the product. The impact pads provide an added cushioned surface between the product and the bumper, best able to absorb impact from minor parking bumps.

Feature
 

  • All Weather MaterialAll Weather MaterialAll season protection
  • Stabilizer BarStabilizer BarFirmly in place
  • Exoskeleton RibsExoskeleton RibsDurability in design
  • Flex Channel HingeFlex Channel HingeConforms as needed
  • Foam Rubber Strap PadsFoam Rubber Strap PadsQuality materials
  • WaterProof Trunk StrapsWaterProof StrapsReady for any condition
  • 3M Reflectors3M ReflectorsHighly visible
  • Cushion PadsCushion PadsExtra absorption zones

Installation

Installation

1. Open trunk and attach strap ends to the carpet * (Fig 1)

2. Center product on rear bumper and adjust straps. Product should always be positioned above the rear exhaust pipes. (Do not block the vehicles exhaust pipes)

3. Before driving be sure to place product inside the trunk (do not drive with product attached). With the velcro straps still attached place the product flat inside the trunk (Fig 2) OPTIONAL: If the BumperBully blocks your rear license plate you may cut out the center portion using a a razor. Use the raised edge as a guide. WARNING! FAILURE TO FOLLOW INSTRUCTONS MAY CAUSE SERIOUS INJURY

NOTE: * If Velcro does not adhere to the vehicle’s carpet, you can use the additional two velcro stickers provided. Attach velcro stickers to a clean smooth surface under the trunk carpet or another accessible area; the straps ends can then attach here. If your vehicle has a spare tire compartment in the trunk, you may drop the straps into the compartment and close the lid (Fig 3). The weight of the lid will keep the straps in place. *** See additional pictures

Caution: Never drive a vehicle with product (Bumper Bully) attached. Doing so may be dangerous. Do not block or cover vehicle's exhaust pipe. Covering the exhaust pipe can damage the product and can allow dangerous fumes to enter the vehicle - resulting in injury or death.

WARNING! FAILURE TO FOLLOW INSTRUCTONS MAY CAUSE SERIOUS INJURY

Product Reviews

Write Review

  1. Great Idea! 5 Star Review

    Posted by on May 18th 2018

    I saw these on cars on the road and I needed to get them..I now have 3!!!

  2. EXCELLENT 5 Star Review

    Posted by on Jun 5th 2017

    iT WAS EASY TO INSTALL AND FIT PERFECTLY ON MY 2017 CHEVY EQUINOX PREMIER.

  3. Does as advertised 5 Star Review

    Posted by on May 8th 2017

    Simple to install and actually works as stated. Well worth the money and an inexpensive way to protect your investment of a new car.

  4. Great Bumper Guard 5 Star Review

    Posted by on Apr 10th 2017

    So far it looks real durable and hopefully will save my car from parking scratches from idiot drivers who don't know how to park. Easy to install. Mine is one of many in my neighborhood.

notice:
Straps are spaced 24 inches apart – Please be sure to measure width of trunk opening to ensure best fit