The Bumper Bully is the best quality bumper protector in the market. There are lots of cheap imitation products that are PVC based, so there is no rubber in them. The GOLD EDITION is our standard bumper protector. Features Steel Reinforced Straps....NO IMPACT PADS!
Not all bumper guards are created equal. Get a bumper protector that really works in the street. Bumper guards are a must have in the urban jungle of New York City. The Bumper Bully is an all weather rear bumper protector made of industrial strength rubber. Vehicles that wear a Bumper Bully have a lower incidence of rear bumper damage than those without a Bumper Bully. Tired of getting screw marks pimpled all over your bumper, then a Bumper Bully is a must have. The Bumper Bully was developed by a parking expert, with years of experience in valet parking
Overall width = 46 inches
Height = 12 inches
Distance between straps = 22 inches
Length of straps = 28 inches
Despite what most people think, not all bumper guards are made the same. The Bumper Bully material feels soft to the touch and has an elastic quality.
Competitor products might look like rubber, but they are really made from a cheap quality hard PVC plastic and have no elasticity. Which one would you prefer? The Bumper Bully bumper protector is all about quality. For this reason we use an all weather rubber material that stays flexible even in coldest weather.
- All Weather Material
- Premium Quality Soft, Elastic Rubber Material
- 46” x 12” Extra Wide
- Proprietary Impact Absorbing Rubber
- Soft Touch Impact Pads**(Platinum Edition ONLY)
Stabilizer Bar System
The patented stabilizer bar system keeps the BumperBully from sagging. Integrally formed within the product, the stabilizer bars lend structural stability to the bumper guard and provide a secure anchor point for the straps. The structural rigidity provided by the stabilizer bars ensures the product will stay flat on the bumper, preventing flop overs and sagging corners.
Waterproof Trunk Straps
The BumperBully trunk straps are made from a special coated material that keeps water from being sucked through the strap and into the trunk. Only the area of the straps exposed to the elements will get wet, the water will not bleed into the rest of the strap, ensuring your trunk any everything in it stays dry.
All Weather Material
Despite what most people think, not all bumper guards are made the same, the Bumper Bully feels soft to the touch and has an elastic quality. The Bumper Bully is all about quality, made of an all weather rubber material that stays flexible even in coldest weather. Our all weather rubber material can be used rain or shine and will not crack, break or tear.
Steel Reinforced Straps
For added security there is a vinyl coated steel cable embedded inside the heavy-duty trunk straps of the BumperBully. The straps are then triple stitched for durability. Traditional scissors or knives cannot cut the steel reinforced straps on the BumperBully, so you can park with ease on crowded city streets.
Soft Touch Strap Pads
The BumperBully trunk straps have 2” x 4” soft foam rubber pads on the straps. The pads provide a cushioned surface and raise the straps off the bumper. By raising the straps off the bumper, the soft strap pads add an additional barrier layer between the strap fabric and the vehicle bumper.
Air Impact Ribs
The raised ribs on the BumperBully cushion minor parking bumps, with raised areas that run linear to the surface, providing strategic impact zones. These areas were designed to flex and compress during parking bumps to absorb some of the impact energy.
3M Safety Reflectors
Using only the best quality products, 3M reflectors provide increased vehicle visibility, better durability and superior adhesion. The reflectors are extra bright, so they provide better illumination and vehicle visibility when parked on dark roads or during emergency stops.
- All Weather MaterialAll season protection
- Stabilizer BarFirmly in place
- Exoskeleton RibsDurability in design
- Flex Channel HingeConforms as needed
- Foam Rubber Strap PadsQuality materials
- WaterProof StrapsReady for any condition
- 3M ReflectorsHighly visible
1. Open trunk and attach strap ends to the carpet * (Fig 1)
2. Center product on rear bumper and adjust straps. Product should always be positioned above the rear exhaust pipes. (Do not block the vehicles exhaust pipes)
3. Before driving be sure to place product inside the trunk (do not drive with product attached). With the velcro straps still attached place the product flat inside the trunk (Fig 2) OPTIONAL: If the BumperBully blocks your rear license plate you may cut out the center portion using a a razor. Use the raised edge as a guide. WARNING! FAILURE TO FOLLOW INSTRUCTONS MAY CAUSE SERIOUS INJURY
NOTE: * If Velcro does not adhere to the vehicle’s carpet, you can use the additional two velcro stickers provided. Attach velcro stickers to a clean smooth surface under the trunk carpet or another accessible area; the straps ends can then attach here. If your vehicle has a spare tire compartment in the trunk, you may drop the straps into the compartment and close the lid (Fig 3). The weight of the lid will keep the straps in place. *** See additional pictures
Caution: Never drive a vehicle with product (Bumper Bully) attached. Doing so may be dangerous. Do not block or cover vehicle's exhaust pipe. Covering the exhaust pipe can damage the product and can allow dangerous fumes to enter the vehicle - resulting in injury or death.
WARNING! FAILURE TO FOLLOW INSTRUCTONS MAY CAUSE SERIOUS INJURY