Our biggest and best rear car bumper protector - The Parking Armor 4.8. Before purchasing make sure your trunk and bumper will accommodate the product. Parking Armor is not compatible with some vehicles. For Parked Vehicles Only !
The ParkingArmor 4.8 is hands down the biggest, best and most effective rear car bumper protector on the market. The 2" thick foam core is lightweight and perfect for cushioning parking bumps. Weather resistant rubber-like material is suitable for outdoor street parking as well as parking garages.
Overall width = 48 inches
Height = 12 inches
Distance between straps = 24 inches
Length of straps = 28 inches
- 36" x 12" Bumper Protection Area
- *** WEATHER RESISTANT RUBBER MATERIAL ***
- Waterproof Steel Reinforced Straps - SRS Straps (Helps Deter Theft)
- 2" EXTRA Thick Hi-Density Foam Core - ULTRA BRITE Silver Safety Strip
- Soft Anti-Skid Foam Pads Behind Trunk Straps (Soft On Paint Finish)
- "Flex-Body" Structure - Allows Parking Armor To Flex Around the Contours of Your Bumper
- Ever Brite Safety Reflector
- Universal Fit – Works with most vehicles
Despite what most people think, not all bumper guards are alike. Parking Armor is made of an industrial coated material, resistant to rain, snow and sleet. Parking Armor is all about quality, made of an all weather rubber-like coated material, Parking Armor stays flexible even in coldest weather.
Turtle Tough Material
Parking Armor has a durable weather-resistant exterior, similar to that of a turtle’s shell, protecting it from the elements and providing maximum coverage for your bumper. With a micro textured coating, ParkingArmor is resistant to not only the elements, but dirt and debris build up too.
Steel Reinforced Straps (SRS)
For added security there is a vinyl coated steel cable embedded inside the heavy-duty trunk straps of the ParkingArmor. The straps are then triple stitched for durability. Traditional scissors or knives cannot cut the steel reinforced straps on the Parking Armor, so you can park with ease on crowded city streets.
Soft Touch Strap Pads
Parking Armor trunk straps have 2” x 4” soft foam rubber pads on the straps. The pads provide a cushioned surface and raise the straps off the bumper. By raising the straps off the bumper, the soft strap pads add an additional barrier layer between the strap fabric and the vehicle bumper.
High Intensity Reflector
Using only the best quality products, ParkingArmor incorporates a full-length reflector, which provides increased vehicle visibility and better durability. The reflector is extra bright and runs the full length of the ParkingArmor, so it provides better illumination and vehicle visibility when parked on dark roads or during emergency stops.
Conforms to Bumper
ParkingArmor is composed of an industrial strength hi-impact foam core. The flexibility of the foam enables the ParkingArmor to conform to the shape of the vehicle’s bumper once the trunk is closed.
Flex Hinge System
Designed with a Flex Hinge System, the ParkingArmor is able to bend and flex around the contours of the bumper’s top edge. Once curved around the top edge, the flex hinge system allows the ParkingArmor to sit flush with the body of the bumper.
Soft Impact Pads
ParkingArmor comes with an added layer of impact protection, soft foam rubber impact cushions in strategic locations on the back of the product. The impact pads provide an added cushioned surface between the product and the bumper, best able to absorb impact from minor parking bumps.
- All Weather MaterialUV resistant and weather rated
- WaterProof StrapsSteel Reinforced
- Hi-Density Foam CoreExtra thick protection
- Anti-Skid Foam PadsKeeps everything in palce
- Flex Body StructureDoes not crack like plastic
- Universal fitFits most vehicles
- Available In 3 SizesMaximum rear bumper protection
Open your trunk and adhere the Velcro end of the strap to the carpet lining.*
Center Parking Armor on the rear bumper and adjust straps as needed. Product should always be positioned above the rear exhaust pipes. DO NOT USE product if it may come in contact or block vehicle's exhaust pipes.
Before driving return Parking Armor inside the trunk (never drive and/or operate vehicle with product attached). Parking Armor is designed to be used with parked vehicles only.
* If velcro straps do not stick to the trunk carpet, use the(2) extra velcro stickers provided. You can mount the velcro to any hard plastic surface inside the trunk. Product straps can then attach here.
Before purchasing a ParkingArmor please consider the following:
If your trunk space is small order the 3.6 Parking Armor. This will allow the bumperguard to store flat inside the trunk. Measure the inside width of the trunk to ensure it will fit.
POSITION OF EXHAUST PIPES
The location of the vehicle’s exhaust pipes in the bumper is important. Note: the PORSCHE CAYENNE has exhaust pipes high in the bumper. Do not cover or block the vehicle’s exhaust ( even after parking the exhaust pipes remain hot and may damage the product voiding any warranty). For a best fit measure the distance between the exhausts and choose a product that would fit between the pipes.
BUMPER MOUNTED REAR LICENSE PLATES
If you plan to park on the street, do not cover your rear license plate with ParkingArmor. or you risk a summons.
NOT FOR REAR ENGINED VEHICLES
Such as Porsche 911, Ferrari, Lamborghini type vehicles...
*******IF YOU ARE STILL NOT SURE IF PARKING ARMOR IS RIGHT FOR YOU, PLEASE E-MAIL US AT CUSTOMER SERVICE BEFORE PURCHASING…………PLEASE PROVIDE THE MAKE MODEL OF VEHICLE
East to install
Posted by Unknown on Oct 3rd 2017
Easy to install. Make sure to have something to protect the paint on your bumper to avoid scuffs.
I am sure this product will protect my bumper from scratches and scuffs from other vehicles parked close to me in NYC.
Great quality product
Posted by Richard on Apr 5th 2016
Maximum padded protection and a great look.