Loading... Please wait...
All prices are in USD
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8

BumpShox XL Plus

Factory direct Price: $39.95

Product Description


The BumpShox XL Plus is the latest and most advanced license plate frame offered, with integrated side compression slots for added impact absorption capacity and maximum vehicle protection. Designed taller, wider and thicker than any standard license plate frame, BumpShox XL Plus measures in at 2.25" inches thick and 14.5" inches wide! Also with the patented FlexFin design extension and pyramid structure, the BumpShox XL Plus has you covered!

The BumpShox XL Plus is a replacement license plate frame made from flexible foam rubber that doubles as a car bumper protector. It is designed to complement the sculpted lines of your vehicle while offering bumper protection 24 hours a day, 7 days a week - no need to remove the bumper guard.


BumpShox Specs

14.5" Width x 2.25" Thick x 8.25" Tall (9.25" w/FlexFin)




Flexible Toughness

Flexible Toughness - Bend it, Flex it, Twist it...BumpShox is resilient and will absorb impact energy then flex back to its original shape bump after bump and will never rust, crack or bend out of shape.


Unobstructed plate design

Unobstructed plate design to clearly view your full license plate, simply push your plate in and attach using standard license plate holes.


Integrated side compression slots

Integrated side compression slots for added impact absorption capacity and maximum vehicle protection.


Pyramid structure

Pyramid structure – BumpShox is taller, wider and thicker than a standard license plate frame to provide extra clearance and maximum protection.

While BumpShox products look enormous on paper they were designed using an angled architecture to complement angled front bumpers of any vehicle style.


Patented FlexFin

Patented FlexFin that extends 1.75” from the top of the BumpShox offering extended protection from taller vehicles and SUVs.


Extreme Weather Rated

Extreme weather rated material resistant to chemicals, UV and weather, which remains flexible even in freezing temperatures.


  • FLEXIBLE FOAMDoes not crack like plastic or bend like metal
  • TOP FLEX FINProvides extra protection from taller vehicles
  • HEAVY DUTYFoam material is strong and flexible
  • RECESSED SCREWPrevents damage to other vehicles
  • EXTRA WIDE/EXTRA THICKExtra dense material provides protection
  • EXTREME WEATHERUV resistant and weather rated



We include screws and bolts, (4) # 14 x 1” and (4) M6 x 1” with your BumpShox. The BumpShox may be attached and used with 2 or 4 screws.

Please note that the standard distance between the license mounting holes is 7 inches - center to center. This is standard license plate spacing in the United States, however due to dealership handling, there may be some exceptions. Please measure the distance between mounting holes before ordering.

Note: BumpShox Will Not Work With Some Volvo vehicles because the screws on certain Volvo license plate brackets are integrated directly into the frame and can not be removed.

BumpShox is Intended For Use on the Front Bumper Only! It Will Not Fit the Rear Bumper Because the Flex-Fin is too tall.

The BumpShox is the amazing new front bumper guard that's worthy of today's high end luxury car or sports car. Whether you drive a Bentley, Porsche, Audi, Mercedes, Ford, Honda, Toyota or another vehicle you can be sure that the BumpShox ultimate bumper guard will compliment your vehicle with class. The tapered ends and pyramid design structure makes the BumpShox look smaller than it is, while enhancing the natural impact characteristics and flexibility. For enhanced protection the BumpShox bumper protector was constructed of a v-tech foam rubber whose energy absorbing qualities makes it ideal for a vehicles bumper. It will not crack, break, rust, bend or collapse like some other bumper guard license plate products. For added bumper protection the BumpShox bumper guard was designed much thicker, taller and wider than a standard license plate frame.


Remove current license plate frame and save screws for STEP 2 (Screws are not provided with BumpShox)
Note: For some vehicles the factory screws may be too short. If this is the case you may need to purchase longer fastners.


Re-install screws making sure Bump Shox and license plate are securely attached to vehicle.
Do not over tighten screws as it may damage BumpShox.
Note: Screws are not included.
Recommended screw size #14 x 3/4 inch

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!